Yaesu FTM-400DR HAM Mic Holder + Yaesu FT2DR Jeep JK 11-18 Grab Bar Mount


Do you struggle to have the mic of your Yaesu FTM-400DR Mobile HAM and your Yaesu FT-2DR Handheld HAM radio securely mounted yet close at hand?

We have the perfect combination mount custom made for your Jeep Wrangler JK 2011 thru 2018..


  • Easy to reach yet out of your way. Compare us with other mounts that obstruct your road view.
  • The radio is angled towards the driver ensuring a great view of its LCD.
  • Provides a verical orientation for your handheld radio's antenna while keeping it elevated enough to clear your dash board for optimal reception and transmission.
  • The device can be put in and taken out in an instant while using just one hand.
  • Depending on the model of your radio we include special spacers and support wings to ensure a secure and rattle free fit.
  • Off-road tested All our designs are rigorously and extensevly real-life tested.
  • Easy 5 minutes or less installation.
  • Many Colors available to fit the interior of your vehicle.
  • Safer than other mounts on the market since it's made of strong plastic. No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
  • Made in USA! All our products are proudly designed and manufactured in the sunny Arizona.


  • Custom made to fit the Passenger Grab Bar in the Jeep Wrangler JK 2011-2018.

The Mic Holder for this model:

  • Supports any CB or HAM Mic for Mobile Radios (Button Type Hanger).

The Radio Support Rail (aka the Vertical Support):

  • Custom made to fit the belt clip for the Yaesu FT-2DR.
  • The rail (the vertical support piece) can be pulled out of the mount when not needed.
  • Rails for other radios are available for purchase.

Other Notes

  • The mount is not compatible with extended batteries that either:
    • Make the radio too long such that it interferes with the mount
    • Extend the depth of the device too much such that the unit cannot be secured to the mount
    • Increase the weight of the device by more than 3oz.
  • Since there is no standard belt-clip design we can not guarnatee fit for any other devices.

Installation Notes:

  • Mounts to the Passenger Grab Bar in a Jeep Wrangler JK 2011-2018.
  • Does not require any drilling or other mods to your vehicle.

Tools Needed to install:

  • A plastic trim removal tool (or a screwdriver).
  • A 8mm socket.

Our Lawyers Say:

  • Our products are for off-road use only.
  • Our mounts are only designed for light accessories as stated under the Compatibility notes.
  • Do NOT modify or overload the mounts with accessories not listed as supported by JeepUniq.
  • Obey your local state and federal laws
  • JeepUniq is not responsible for any improper or illegal use of our accessories.

Customer Reviews

Based on 4 reviews
Just what I needed -- easy install -- my Ham friends asking where I got it

I first learned about this product from a YouTube video on finding the best install for my Yaesu FTM-400 in my Jeep Wrangler. I kept my Mic in the little area in front of my gear shift since that is where I mounted my radio head on a custom metal plate. I was soo relieved to see that I can move my Mic to be easily accessible on my grab bar so I can operate my radio with my remote mic buttons such as scanning, adjusting power, etc. I installed this with minimal effort and it holds my HT perfectly as well by just sliding the belt clip over the intended mount. This makes my setup even more convenient for those bike rides and triathlons I work with my Ham Radio group so my Mic and HT is not sitting on my seat for easy access. Thanks soo much for making a solid well built product that does come in different colors for the HT part of the mount -- I got the yellow to match my jeep. Thanks for the follow up emails as well Jeep Uniq to ensure I was doing well with the product. Would definitely buy again and already recommended it to my ham radio installer friend of mines at his shop since he always love learning of new clever accessories to mount gear in vehicles -- he loved it.

FTM-400XDR/FT2DR Grab Bar Mount

Fits snugly on the grab bar with zero movement. Also fits my Baofeng BF-F8HP.

Just what I was looking for

This mount is very well made and it fit perfectly. It works great for holding my FT2DR radio and my FTM400 mic.

FTM-400DR HAM Mic Holder + Yaesu FT2DR Jeep JK 11-18 Grab Bar Mount

Great products! The mounts work perfectly and really cleaned up the inside of my Wrangler. I have 4 radios in the jeep, and I need some way to organize the mics. Jeep Uniq mounts were the answer.

★ Reviews ★

Let customers speak for us

539 reviews
Works as designed

You have to give the grab bar a little shove. It fits fine. Works well.

Classy AND Functional

I have the best communications setup on the trail! Sturdy & functional, looks good too.

Solid mount

Well built, sturdy feeling on grab bar. Held ham radio very safely and conveniently.

Fits perfectly

I was very pleased with this purchase. It perfectly holds both my HAM and CB radios on the grab handle of my JL.

Great product - Great people

Like the title says, great product, great people. I needed a verification that my radio would fit the part I ordered, they verified it and then shipped my part.