ACCESSORIES
  • All our JeepUniq Combo Mounts are modular and accept additional Vertical Rails to fit whatever new HAM or SATCOM device you might acquire.

  • Shop by Vehicle
  • The Jeep Gladiator and the Jeep JL share the same grab bars, so the JL mounts will work on both. 

    Due to the JK's interior redesign in 2010, we had to split the JK in pre and post redesign models.

    For other Jeep models and years, as well as other vehicle brands, such as Toyotas or Land Rovers, our 67 Designs or RAM Compatible ball mounts are a great solution.

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • by Device
  • QL-67DBALL-L27-B-M1-8435

    Garmin InReach Mini SATCOM + Midland T71 Radio Holder with 20mm 67 Designs Ball

    Color
    Black

    Garmin InReach Mini SATCOM SATCOM + Midland T71 Radio Holder with 20mm 67 Designs Ball

    Do you want to have your Garmin satcom and your Midland radio securely attached yet within easy reach?

    You just found the most versatile yet custom made mount for your 67 Designs Arm mounted in your vehicle.

    Benefits

    • Easy to install with no permanent modification to your Jeep.
    • Close to reaching yet out of your way.
    • Provides a vertical orientation for your handheld radio's antenna to clear the dashboard for optimal reception.
    • The radio can be inserted in and taken out in an instant while using just one hand.
    • Expandable system - additional rails for other radios and devices are available for purchase on our site if you decide to change your device.
    • All our 67 Designs mounts include a free set of Lateral Support Wings.
    • A 20mm Genuine 67 Designs Ball is included and pre-fitted to the mount.
    • All our designs are rigorously and extensively real-life tested off-road.
    • Mount installs in 10 seconds or less installation.
    • Safer than other mounts on the market - made of durable plastic - not tin.
    • No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
    • Made in the USA! All our products are proudly designed and manufactured in sunny Arizona.

    Fitment

    • Works with any vehicle with a 67 Designs CF set-up.
    • We also have RHD (right-hand drive) versions available. To request just send us a note.

    The SATCOM holder for this model:

    • Perfect fit for your Garmin InReach Mini SATCOM.
    • The Garmin SATCOM easily slide in an out.
    • Supports any Garmin InReach Mini.
    • Note that some product images might display other Handheld SATCOM. However the SATCOM holder is identical.

    The Radio support rail (aka the Vertical Support Rail):

    • Custom made to fit the Midland T71's belt clip.
    • Rails for other radios are available for purchase on our site if you decide to change your device.
    • The mount is not compatible with extended batteries that either:
      • Make the radio too long such that it interferes with the mount.
      • Extend the depth of the device too much such that the unit cannot be secured to the mount.
      • Increase the weight of the device by more than 3oz.
      • See this article for a better solution
    • Since there is no standard belt-clip design we can not guarantee fit for any other devices.
    • Depending on the model of your radio we include special spacers to ensure a secure and rattle-free fit.
    • Note that some product images might display other Handheld Radio. However the Radio rail is similar but is specific for your device.

    Other Notes

    • A 20mm Genuine 67 Designs Ball is included and pre-fitted to the mount.
    • Note that some product images might display a 1 inch RAM ball set-up. The mount is similar except for using a 20mm 67 Designs ball instead of the RAM one

    Installation:

    • No tools needed.
    • Attach the mount's 20 mm ball to your 67 Designs Carbon Fiber arm.

    Important Notes:

    • Our products are for off-road use only.
    • Our mounts are only designed for light accessories as stated under the Compatibility notes.
    • Do NOT modify or overload the mounts with accessories not listed as supported by JeepUniq.
    • Obey your local state and federal laws
    • JeepUniq is not responsible for any improper or illegal use of our accessories.
    • Vehicle's owner is responsible for ensuring that mounts are not in the way of the airbags.
    • Note that some product images might display a 1 inch RAM ball set-up. The mount is similar except for using a 20mm 67 Designs ball instead of the RAM one

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)