Garmin inReach Vertical Support Rail Add-on


Vertical Support Rail for Garmin inReach

Expand your existing JeepUniq Combo Mount with an additional rail to support additional devices.



  • The Garmin inReach is angled towards the driver ensuring a great view of its LCD.
  • Provides a vertical orientation for your handheld radio's antenna while keeping it elevated enough to clear your dashboard for optimal reception and transmission.
  • The device can be put in and taken out in an instant while using just one hand.
  • Allows your Garmin inReach Explorer be always charged and ready to go.
  • Cost Effective by leveraging any of our Combo mounts.
  • Easy 10 seconds Install or less installation.
  • Many Colors available to fit the interior of your vehicle.
  • Safer than other mounts on the market since it's made of strong plastic. No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
  • Made in USA! All our products are proudly designed and manufactured in the sunny Arizona.
  • Fitment 

    • Custom made to fit to allow bolting on the Garmin 010-12525-00 Powered Mount Cradle (NOT INCLUDED).

    What's Included

    • One (1) Special Vertical Rail Assembly, custom made to fit the Garmin Powered Cradle for Garmin inReach. The cradle is NOT INCLUDED.
    • Four (4) Bolt + washer + lock nut sets

    Installation Notes:

    • To avoid damage to your existing JeepUniq mount and/or your vehicle, we strongly recommend that you remove your mount off your vehicle. Use patience and care not to break anything.
    • Make sure not to break the mount when pulling your existing Vertical Rail. On some mounts the Rail will seem to be stuck to the mount - if so, use a blunt screwdriver and a rubber mallet to tap it out.

    Tools Needed to install:

    • No tools needed.

    Our Lawyers Say:

    • Our products are for off-road use only.
    • Obey your local state and federal laws
    • JeepUniq is not responsible for any improper or illegal use of our accessories.

    Customer Reviews

    Based on 1 review
    A great solution (but not perfect)

    I'm very pleased with it. I've had it out on a few trips now and find I'd rather check my vehicle speed on the Garmin than my speedometer. It's digital and very accurate. Bonus is that I can also see elevation, which is handy when heading to a trailhead. Normally I can tell how close I am by time or distance, but elevation is a handy alternative. And the fact that I'm charging the inReach all along is important too, of course.

    Loses 1 star because the shipping was delayed by a few days until I pointed it out. More importantly, I found the attachment of the Garmin connector to the main support wasn't very solid. An easy fix was to put a bit of metal strapping on the backside, but that also loses a star.

    Otherwise I'd highly recommend it!

    Why customers love us

    276 reviews

    This is one great radio mount. Radio fits perfectly gives it a custom look.

    Midland 75-822 CB Mic Holder + Baofeng UV82 Jeep JK 07-10 Grab Bar Mount

    Cobra 75 WX CB Mic Holder + Baofeng UV5R Jeep JK 11-18 Grab Bar Mount

    Two way radio mount

    It was easy to install, instructions were accurate. Although I got a mount for Yaesu and my radio is a baofeng, it still works, but the mike did not fit the mount.

    Great mount

    Second mount I've bought from you guys and it fits great. Thanks!