Menu
0
0

Your Cart is Empty

ACCESSORIES

All our JeepUniq Combo Mounts are modular and accept additional Vertical Rails to fit whatever new HAM or SATCOM device you might acquire.

  • All our JeepUniq Combo Mounts are modular and accept additional Vertical Rails to fit whatever new HAM or SATCOM device you might acquire.

  • Accessories & Parts
  • Shop by Vehicle

    The Jeep Gladiator and the Jeep JL share the same grab bars, so the JL mounts will work on both. 

    Due to the JK's interior redesign in 2010, we had to split the JK in pre and post redesign models.

    For other Jeep models and years, as well as other vehicle brands, such as Toyotas or Land Rovers, our 67 Designs or RAM Compatible ball mounts are a great solution.

  • The Jeep Gladiator and the Jeep JL share the same grab bars, so the JL mounts will work on both. 

    Due to the JK's interior redesign in 2010, we had to split the JK in pre and post redesign models.

    For other Jeep models and years, as well as other vehicle brands, such as Toyotas or Land Rovers, our 67 Designs or RAM Compatible ball mounts are a great solution.

  • Shop by Vehicle
  • by Device
  • CB Radios
  • HAM Radios
  • Other Devices
  • 67 Designs and RAM Ball Mounts
  • Previous | Next
    Home / Accessories & Parts / Garmin inReach Vertical Support Rail Add-on
    Garmin inReach Vertical Support Rail Add-on
    Garmin inReach Vertical Support Rail Add-on
    Garmin inReach Vertical Support Rail Add-on
    Garmin inReach Vertical Support Rail Add-on
    Garmin inReach Vertical Support Rail Add-on
    Garmin inReach Vertical Support Rail Add-on
    Garmin inReach Vertical Support Rail Add-on
    Garmin inReach Vertical Support Rail Add-on

    VRG00B

    Garmin inReach Vertical Support Rail Add-on

    $23.99$29.99

     

    Vertical Support Rail for Garmin inReach

    Expand your existing JeepUniq Combo Mount with an additional rail to support additional devices.

     

    Benefits

  • The Garmin inReach is angled towards the driver ensuring a great view of its LCD.
  • Provides a vertical orientation for your handheld radio's antenna while keeping it elevated enough to clear your dashboard for optimal reception and transmission.
  • The device can be put in and taken out in an instant while using just one hand.
  • Allows your Garmin inReach Explorer be always charged and ready to go.
  • Cost Effective by leveraging any of our Combo mounts.
  • Easy 10 seconds Install or less installation.
  • Many Colors available to fit the interior of your vehicle.
  • Safer than other mounts on the market since it's made of strong plastic. No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
  • Made in USA! All our products are proudly designed and manufactured in the sunny Arizona.

    • Fitment 

    • Custom made to fit to allow bolting on the Garmin 010-12525-00 Powered Mount Cradle (NOT INCLUDED).

    What's Included

    • One (1) Special Vertical Rail Assembly, custom made to fit the Garmin Powered Cradle for Garmin inReach. The cradle is NOT INCLUDED.
    • Four (4) Bolt + washer + lock nut sets

    Installation Notes:

    • To avoid damage to your existing JeepUniq mount and/or your vehicle, we strongly recommend that you remove your mount off your vehicle. Use patience and care not to break anything.
    • Make sure not to break the mount when pulling your existing Vertical Rail. On some mounts the Rail will seem to be stuck to the mount - if so, use a blunt screwdriver and a rubber mallet to tap it out.

    Tools Needed to install:

    • No tools needed.

    Our Lawyers Say:

    • Our products are for off-road use only.
    • Obey your local state and federal laws
    • JeepUniq is not responsible for any improper or illegal use of our accessories.

    Dont't Forget these Related Products
    Support Wing Set
    $4.99 $6.99
    Garmin inReach Vertical Support Rail Add-on
    $23.99 $29.99
    Add-on Vertical Rails for JK, 67 Designs, or RAM Combo Mounts - 28mm
    $14.99
    Add-on Vertical Rails for JK, 67 Designs, or RAM Combo Mounts - 22mm
    $14.99
    Add-on Vertical Rails for JK, 67 Designs, or RAM Combo Mounts - 27mm
    $14.99
    Replacement Clip for Garmin devices (only for JeepUNIQ mounts)
    $4.99
    Add-on Vertical Rails for JK, 67 Designs, or RAM Combo Mounts - 26mm
    $14.99
    Add-on Vertical Rails for JK, 67 Designs, or RAM Combo Mounts - 24mm
    $14.99
    Add-on Vertical Rails for JK, 67 Designs, or RAM Combo Mounts - 23mm
    $14.99
    Add-on Vertical Rails for JK, 67 Designs, or RAM Combo Mounts - 25mm
    $14.99

    Customer Reviews

    Based on 3 reviews
    67%
    (2)
    0%
    (0)
    33%
    (1)
    0%
    (0)
    0%
    (0)
    C
    Carter, J. (Raleigh, US)
    The perfect location for the Garmin inReach

    This is the perfect location for the Garmin inReach where it can still see the sky but within arms reach and securely mounted.

    User picture
    M
    Michael M. (Hamptonville, US)
    Perfect Solution for the inReach!

    Couldn’t be happier with this mount!

    User picture
    P
    Paul T. (Bellevue, US)
    A great solution (but not perfect)

    I'm very pleased with it. I've had it out on a few trips now and find I'd rather check my vehicle speed on the Garmin than my speedometer. It's digital and very accurate. Bonus is that I can also see elevation, which is handy when heading to a trailhead. Normally I can tell how close I am by time or distance, but elevation is a handy alternative. And the fact that I'm charging the inReach all along is important too, of course.

    Loses 1 star because the shipping was delayed by a few days until I pointed it out. More importantly, I found the attachment of the Garmin connector to the main support wasn't very solid. An easy fix was to put a bit of metal strapping on the backside, but that also loses a star.

    Otherwise I'd highly recommend it!