BL-K18JL-L24-B-M1-24527
Baofeng BF-S112 HAM Mic + Yaesu FT-25R Radio Holder Clip-on for Jeep JL/JT 18-23 Grab Bar
$59.95
Baofeng BF-S112 HAM Mic + Yaesu FT-25R Radio Holder Clip-on for Jeep JL Grab Bar
Do you struggle to keep your Baofeng mic and your Yaesu radio securely mounted and close at hand?You just found the most versatile yet custom made mount for your Jeep Wrangler JL (2018-2023)
Benefits
- Easy to install with no permanent modification to your Jeep.
- Close to reaching yet out of your way.
- Provides a vertical orientation for your handheld radio's antenna to clear the dashboard for optimal reception.
- The radio can be inserted in and taken out in an instant while using just one hand.
- Expandable system - additional rails for other radios and devices are available for purchase on our site if you decide to change your device.
- All our designs are rigorously and extensively real-life tested off-road.
- Mount installs in 5 seconds: just slip it over the passenger'' grab bar and secure it with the provided latch.
- Safer than other mounts on the market - made of durable plastic - not tin.
- No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
- Made in the USA! All our products are proudly designed and manufactured in sunny Arizona.
Fitment
- Custom made to clip onto the passenger-side grab bar of a Jeep Wrangler JL.
- We also have RHD (right-hand drive) versions available. To request just send us a note.
The Mic holder for this model:
- Perfect fit for your Baofeng BF-S112 Mic.
- Supports any mic for Portable Handheld Radio using a belt-clip attachment point.
- Note that some product images might display other Mobile Mic. However the Mic holder is identical.
The Radio support rail (aka the Vertical Support Rail):
- Custom made to fit the Yaesu FT-25R's belt clip.
- Rails for other radios are available for purchase on our site if you decide to change your device.
- The mount is not compatible with extended batteries that either:
- Make the radio too long such that it interferes with the mount.
- Extend the depth of the device too much such that the unit cannot be secured to the mount.
- Increase the weight of the device by more than 3oz.
- See this article for a better solution
- Since there is no standard belt-clip design we can not guarantee fit for any other devices.
- Depending on the model of your radio we include special spacers to ensure a secure and rattle-free fit.
- Note that some product images might display other Handheld Radio. However the Radio rail is similar but is specific for your device.
Other Notes
Installation:
- No tools needed.
Important Notes:
- Our products are for off-road use only.
- Our mounts are only designed for light accessories as stated under the Compatibility notes.
- Do NOT modify or overload the mounts with accessories not listed as supported by JeepUniq.
- Obey your local state and federal laws
- JeepUniq is not responsible for any improper or illegal use of our accessories.
- Vehicle's owner is responsible for ensuring that mounts are not in the way of the airbags.
- We constantly update and improve the designs of our products. Some product pictures might not represent the latest designs.
Search our shop
Customer Reviews
Based on 36 reviews
86%
(31)
11%
(4)
3%
(1)
0%
(0)
0%
(0)
K
Baofeng BF-S112 HAM Mic + Baofeng BF-F8HP Radio Holder Clip-on for Jeep JL Grab Bar
D
This little product is great! Doesn’t take any tools to put it on, works perfectly at keeping the radio in reach and out from under my feet when I’m on the trails. Exactly what I was looking for except I wish you had more retevis options. Other than that, I just ordered a baofeng option and it works fine. I have the retevis rb17p with a retevis compatible shoulder mic.
S
Product is great, fits perfectly and holds the radio securely.
J
I purchased the Wouxan handheld mount for my Jeep. It's very solid and working great. I installed an external antenna and screw it in place on the Wouxan when I bring it out to the Jeep. Works great.
T
The mount is solid and stays firmly attached even when getting jostled around a bit. Only complaint is that the radio sits a little off the bottom and rattles but is a minor inconvenience. Overall solid setup
C
Item fits great and is well made.
S
Took a chance this would work since they don't have one listed for my radio (Baofeng UV-9r) but it didn't fit and had to return. Quality of the mount was solid and I really wish it had worked and will keep checking to see if they come up with one that works with my radio. Only issue is with communication with customer service. I emailed asking if they had a mount compatible with my radio and no response so I took a chance. When it came time to return the website says to contact them before returning I did so and the response I got was "follow instructions on the website" which I thought I did by contacting them. It has also been a few weeks since my return and zero communication on if they received my return.
B
I bought the mount for my Gladiator. It works perfect. Love that I can remove it easily when not needing it. Turns out that it works perfectly in my rock crawler Jeep as well. I have a 1 3/4 full cage and it fits great on the dash bar. Love it!
D
Baofeng BF-S112 HAM Mic + Baofeng UV-5R Radio Holder Clip-on for Jeep JL Grab Bar
J
Fits perfectly and solves an issue I was looking to solve. Love it.
Customer Reviews
Based on 36 reviews
86%
(31)
11%
(4)
3%
(1)
0%
(0)
0%
(0)
K
Baofeng BF-S112 HAM Mic + Baofeng BF-F8HP Radio Holder Clip-on for Jeep JL Grab Bar
D
This little product is great! Doesn’t take any tools to put it on, works perfectly at keeping the radio in reach and out from under my feet when I’m on the trails. Exactly what I was looking for except I wish you had more retevis options. Other than that, I just ordered a baofeng option and it works fine. I have the retevis rb17p with a retevis compatible shoulder mic.
S
Product is great, fits perfectly and holds the radio securely.
J
I purchased the Wouxan handheld mount for my Jeep. It's very solid and working great. I installed an external antenna and screw it in place on the Wouxan when I bring it out to the Jeep. Works great.
T
The mount is solid and stays firmly attached even when getting jostled around a bit. Only complaint is that the radio sits a little off the bottom and rattles but is a minor inconvenience. Overall solid setup
C
Item fits great and is well made.
S
Took a chance this would work since they don't have one listed for my radio (Baofeng UV-9r) but it didn't fit and had to return. Quality of the mount was solid and I really wish it had worked and will keep checking to see if they come up with one that works with my radio. Only issue is with communication with customer service. I emailed asking if they had a mount compatible with my radio and no response so I took a chance. When it came time to return the website says to contact them before returning I did so and the response I got was "follow instructions on the website" which I thought I did by contacting them. It has also been a few weeks since my return and zero communication on if they received my return.
B
I bought the mount for my Gladiator. It works perfect. Love that I can remove it easily when not needing it. Turns out that it works perfectly in my rock crawler Jeep as well. I have a 1 3/4 full cage and it fits great on the dash bar. Love it!
D
Baofeng BF-S112 HAM Mic + Baofeng UV-5R Radio Holder Clip-on for Jeep JL Grab Bar
J
Fits perfectly and solves an issue I was looking to solve. Love it.