ML-K18JL-L22-B-M1-27007
Midland 75-822 CB Mic + Baofeng UV-82 Radio Holder Clip-on for Jeep JL/JT 18-23 Grab Bar
$59.95
Midland 75-822 CB Mic + Baofeng UV-82 Radio Holder Clip-on for Jeep JL Grab Bar
Do you wish to keep your Midland mic and your Baofeng radio securely attached yet close at hand?We have the perfect mount custom made for your Jeep Wrangler JL (2018-2023)
Benefits
- Easy to install with no permanent modification to your Jeep.
- Close to reaching yet out of your way.
- Provides a vertical orientation for your handheld radio's antenna to clear the dashboard for optimal reception.
- The radio can be inserted in and taken out in an instant while using just one hand.
- Expandable system - additional rails for other radios and devices are available for purchase on our site if you decide to change your device.
- All our designs are rigorously and extensively real-life tested off-road.
- Mount installs in 5 seconds: just slip it over the passenger'' grab bar and secure it with the provided latch.
- Safer than other mounts on the market - made of durable plastic - not tin.
- No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
- Made in the USA! All our products are proudly designed and manufactured in sunny Arizona.
Fitment
- Custom made to clip onto the passenger-side grab bar of a Jeep Wrangler JL.
- We also have RHD (right-hand drive) versions available. To request just send us a note.
The Mic holder for this model:
- Perfect fit for your Midland 75-822 Mic.
- Supports any Midland 75-822 Handheld Radio WITHOUT battery. Must use car-kit instead..
The Radio support rail (aka the Vertical Support Rail):
- Custom made to fit the Baofeng UV-82's belt clip.
- Rails for other radios are available for purchase on our site if you decide to change your device.
- The mount is not compatible with extended batteries that either:
- Make the radio too long such that it interferes with the mount.
- Extend the depth of the device too much such that the unit cannot be secured to the mount.
- Increase the weight of the device by more than 3oz.
- See this article for a better solution
- Since there is no standard belt-clip design we can not guarantee fit for any other devices.
- Depending on the model of your radio we include special spacers to ensure a secure and rattle-free fit.
- Note that some product images might display other Handheld Radio. However the Radio rail is similar but is specific for your device.
Other Notes
Installation:
- No tools needed.
Important Notes:
- Our products are for off-road use only.
- Our mounts are only designed for light accessories as stated under the Compatibility notes.
- Do NOT modify or overload the mounts with accessories not listed as supported by JeepUniq.
- Obey your local state and federal laws
- JeepUniq is not responsible for any improper or illegal use of our accessories.
- Vehicle's owner is responsible for ensuring that mounts are not in the way of the airbags.
- We constantly update and improve the designs of our products. Some product pictures might not represent the latest designs.
Search our shop
Customer Reviews
Based on 21 reviews
90%
(19)
10%
(2)
0%
(0)
0%
(0)
0%
(0)
D
Works great!
F
It is a simple but effective way to hold my GMRS radio along with speaker mic. However, since I had a drop-in plastic tray in my grab handle, it did require using a dremel cutter to create a rectangular slot in the tray for the JeepUniq to fit through.
V
I wasn't sure if these mounts would fit my particular equipment. I have a Baofeng UV-5G and a Commountain handheld mic. Dan was very helpful and patient in helping me determine if these mounts would fit, and ultimately I ordered the Midland 75-822 mic holder with the Baofeng UV-5R; which fits my partiuclar setup perfectly! So happy I got one, just used it this weekend and it was so convenient and made grabbing the mic much quicker and faster. Was even able to fit it through a JLU passenger grab bar tray (with a little dremeling out a hole in the tray!)
M
Very sturdy mount keeps my handheld radio within reach. Top-notch customer service.
N
Absolutely love how sturdy and simple the design of the holder clip. it is an item i would recommend every jeep owner who goes wheeling. no hassle and simple install.
M
Midland 75-822 CB Mic + Midland GXT1000 Radio Holder Clip-on for Jeep JL Grab Bar
S
Quality product and excellent service
P
Great snug fit and functions as advertised, it does what it is made for. It completely appears to be laser printed though not that it would be bad.
R
This is a great idea for radio mounting in the confines of a Jeep. Well made, easy to install, and works well!
C
Went on my very first off roading adventure and this holder did amazing! Very very happy with it! My ham radio didn’t move. Very easy to install!
Customer Reviews
Based on 21 reviews
90%
(19)
10%
(2)
0%
(0)
0%
(0)
0%
(0)
D
Works great!
F
It is a simple but effective way to hold my GMRS radio along with speaker mic. However, since I had a drop-in plastic tray in my grab handle, it did require using a dremel cutter to create a rectangular slot in the tray for the JeepUniq to fit through.
V
I wasn't sure if these mounts would fit my particular equipment. I have a Baofeng UV-5G and a Commountain handheld mic. Dan was very helpful and patient in helping me determine if these mounts would fit, and ultimately I ordered the Midland 75-822 mic holder with the Baofeng UV-5R; which fits my partiuclar setup perfectly! So happy I got one, just used it this weekend and it was so convenient and made grabbing the mic much quicker and faster. Was even able to fit it through a JLU passenger grab bar tray (with a little dremeling out a hole in the tray!)
M
Very sturdy mount keeps my handheld radio within reach. Top-notch customer service.
N
Absolutely love how sturdy and simple the design of the holder clip. it is an item i would recommend every jeep owner who goes wheeling. no hassle and simple install.
M
Midland 75-822 CB Mic + Midland GXT1000 Radio Holder Clip-on for Jeep JL Grab Bar
S
Quality product and excellent service
P
Great snug fit and functions as advertised, it does what it is made for. It completely appears to be laser printed though not that it would be bad.
R
This is a great idea for radio mounting in the confines of a Jeep. Well made, easy to install, and works well!
C
Went on my very first off roading adventure and this holder did amazing! Very very happy with it! My ham radio didn’t move. Very easy to install!