IL-1118-L21-B-M1-20369
Icom IC-2730 HAM Mic + Baofeng UV-5R Radio Holder for Jeep JK 11-18 Grab Bar
$49.95
Icom IC-2730 HAM Mic + Baofeng UV-5R Radio Holder for Jeep JK 11-18 Grab Bar
Do you wish to keep your Icom mic and your Baofeng radio securely attached and within easy reach?Here is what many call the best Jeep accessory for your Jeep Wrangler JK 2011 thru 2018.
Benefits
- Easy to install with no permanent modification to your Jeep.
- Close to reaching yet out of your way.
- The radio is slightly angled towards the driver ensuring a great view of its LCD.
- Expandable system - additional rails for other radios and devices are available for purchase on our site if you decide to change your device.
- All our designs are rigorously and extensively real-life tested off-road.
- Mount installs quickly in 5 minutes or less.
- Safer than other mounts on the market - made of durable plastic - not tin.
- No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
- Made in the USA! All our products are proudly designed and manufactured in sunny Arizona.
Fitment
- Custom made to fit the left corner of the passenger-side grab bar of a Jeep Wrangler JK 2011-2018.
- We also have RHD (right-hand drive) versions available. To request just send us a note.
The Mic holder for this model:
- Perfect fit for your Icom IC-2730 Mic.
- Supports any mic for ICOM Handheld Radio using a Square Hole Attachment Point.
- Note that some product images might display other Mobile Mic. However the Mic holder is identical.
The Radio support rail (aka the Vertical Support Rail):
- Custom made to fit the Baofeng UV-5R's belt clip.
- Rails for other radios are available for purchase on our site if you decide to change your device.
- The mount is not compatible with extended batteries that either:
- Make the radio too long such that it interferes with the mount.
- Extend the depth of the device too much such that the unit cannot be secured to the mount.
- Increase the weight of the device by more than 3oz.
- See this article for a better solution
- Since there is no standard belt-clip design we can not guarantee fit for any other devices.
- Depending on the model of your radio we include special spacers to ensure a secure and rattle-free fit.
- Note that some product images might display other Handheld Radio. However the Radio rail is similar but is specific for your device.
Other Notes
Installation:
- You will need a plastic trim removal tool (or a screwdriver).
- An 8mm socket.
- Mount installs quickly in 5 minutes or less.
- Please watch our install videos
Important Notes:
- Our products are for off-road use only.
- Our mounts are only designed for light accessories as stated under the Compatibility notes.
- Do NOT modify or overload the mounts with accessories not listed as supported by JeepUniq.
- Obey your local state and federal laws
- JeepUniq is not responsible for any improper or illegal use of our accessories.
- Vehicle's owner is responsible for ensuring that mounts are not in the way of the airbags.
- We constantly update and improve the designs of our products. Some product pictures might not represent the latest designs.
Search our shop
K
I have had this mount installed for a while now and I don't write many reviews. Since I installed this Dual Mount I have driven many dirt and rough dirt roads with my radio's Mic and hand held on the mount. This past weekend we drove one of the SPTR rally stages checking the course over. The Mic nor the HT never came off the mount unless I was taking them off. Also, I was pleasantly surprised how well the Hand Held stayed in position and didn't lean in one direction or the other after harsh terrain. P.S. - the install with their instructions is very easy. My other Heavy Sweep drivers are now shopping for theirs.
S
Bought the grab bar mounts for my 2017 JK to hold my mics for my ICOM HAM, President Bill CB and Midland MXT275 radios. Solid mounts and no issues when off-roading. Highly recommend Jeep Uniq’s products and their service is extremely fast!
G
This is my second time ordering, and again I'm 100% pleased! Very simple idea, but well excecuted and they have worked perfectly with every radio I have ordered for!
S
Awesome product, do wish it turned toward the driver a little more but theres not much space to work with there and keep it out of the way.
J
Perfect fit; the ICOM mount matches the notch on the microphone. Very sturdy
M
I have purchased two different JeepUniq mounts over time and have been thrilled with them both. They are incredibly well designed and fit your specific radio / mic perfectly. Don't hesitate - these mounts are awesome!
D
Very nice quality and great concept
B
While a little more expensive than others, the mounts are rugged, built for a specific application, and well designed for easy use.
B
Great products and top notch customer service! Wholeheartedly recommending these solutions.
m
Very helpfully and fast delivered And product are great
K
I have had this mount installed for a while now and I don't write many reviews. Since I installed this Dual Mount I have driven many dirt and rough dirt roads with my radio's Mic and hand held on the mount. This past weekend we drove one of the SPTR rally stages checking the course over. The Mic nor the HT never came off the mount unless I was taking them off. Also, I was pleasantly surprised how well the Hand Held stayed in position and didn't lean in one direction or the other after harsh terrain. P.S. - the install with their instructions is very easy. My other Heavy Sweep drivers are now shopping for theirs.
S
Bought the grab bar mounts for my 2017 JK to hold my mics for my ICOM HAM, President Bill CB and Midland MXT275 radios. Solid mounts and no issues when off-roading. Highly recommend Jeep Uniq’s products and their service is extremely fast!
G
This is my second time ordering, and again I'm 100% pleased! Very simple idea, but well excecuted and they have worked perfectly with every radio I have ordered for!
S
Awesome product, do wish it turned toward the driver a little more but theres not much space to work with there and keep it out of the way.
J
Perfect fit; the ICOM mount matches the notch on the microphone. Very sturdy
M
I have purchased two different JeepUniq mounts over time and have been thrilled with them both. They are incredibly well designed and fit your specific radio / mic perfectly. Don't hesitate - these mounts are awesome!
D
Very nice quality and great concept
B
While a little more expensive than others, the mounts are rugged, built for a specific application, and well designed for easy use.
B
Great products and top notch customer service! Wholeheartedly recommending these solutions.
m
Very helpfully and fast delivered And product are great