CL-1118-L21-B-M1-21345
President Johnny CB Mic + Rugged Radios RH-5R Radio Holder for Jeep JK 11-18 Grab Bar
$49.95
President Johnny CB Mic + Rugged Radios RH-5R Radio Holder for Jeep JK 11-18 Grab Bar
Do you want to have your President mic and your Rugged Radios radio securely attached yet within easy reach?We have the perfect mount custom made for your Jeep Wrangler JK 2011 thru 2018.
Benefits
- Easy to install with no permanent modification to your Jeep.
- Close to reaching yet out of your way.
- The radio is slightly angled towards the driver ensuring a great view of its LCD.
- Expandable system - additional rails for other radios and devices are available for purchase on our site if you decide to change your device.
- All our designs are rigorously and extensively real-life tested off-road.
- Mount installs quickly in 5 minutes or less.
- Safer than other mounts on the market - made of durable plastic - not tin.
- No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
- Made in the USA! All our products are proudly designed and manufactured in sunny Arizona.
Fitment
- Custom made to fit the left corner of the passenger-side grab bar of a Jeep Wrangler JK 2011-2018.
- We also have RHD (right-hand drive) versions available. To request just send us a note.
The Mic holder for this model:
- Perfect fit for your President Johnny Mic.
- Supports any mic for mobile CB/HAM/GMRS radios using round-button type hanger.
- Note that some product images might display other Mobile Mic. However the Mic holder is identical.
The Radio support rail (aka the Vertical Support Rail):
- Custom made to fit the Rugged Radios RH-5R's belt clip.
- Rails for other radios are available for purchase on our site if you decide to change your device.
- The mount is not compatible with extended batteries that either:
- Make the radio too long such that it interferes with the mount.
- Extend the depth of the device too much such that the unit cannot be secured to the mount.
- Increase the weight of the device by more than 3oz.
- See this article for a better solution
- Since there is no standard belt-clip design we can not guarantee fit for any other devices.
- Depending on the model of your radio we include special spacers to ensure a secure and rattle-free fit.
- Note that some product images might display other Handheld Radio. However the Radio rail is similar but is specific for your device.
Other Notes
Installation:
- You will need a plastic trim removal tool (or a screwdriver).
- An 8mm socket.
- Mount installs quickly in 5 minutes or less.
- Please watch our install videos
Important Notes:
- Our products are for off-road use only.
- Our mounts are only designed for light accessories as stated under the Compatibility notes.
- Do NOT modify or overload the mounts with accessories not listed as supported by JeepUniq.
- Obey your local state and federal laws
- JeepUniq is not responsible for any improper or illegal use of our accessories.
- Vehicle's owner is responsible for ensuring that mounts are not in the way of the airbags.
- We constantly update and improve the designs of our products. Some product pictures might not represent the latest designs.
Search our shop
Customer Reviews
Based on 350 reviews
93%
(327)
5%
(18)
1%
(5)
0%
(0)
0%
(0)
E
Love this mount. Super secure and functional. Even better than the JL version for use with a ball. You should make a version like this for the JL
D
We spent a couple hundred miles off-road the other day and this held my GMRS mic in perfect order. We had a lot of radio traffic in the trip. Additionally it held my ham hand held in perfect order.
Highly recommend.
C
This is a great item and works perfectly.
J
I have about five jeeps, all with the typical cb radios and recently acquired a GMRS. I was trying to find a decent mount and had seen one brand that mounted magnetically. But I was worried about interference of the compass, on this particular model.
That’s when I came across JeepUniq.
I found great help trying to figure out which mount I needed for my unlisted radio. After sending in a few photos I was given the type of upper mount to select.
I also like that there’s a small, curved area within the upper mount to route a power cable. Only one thing I’d suggest is on the secondary, upper mount would be an access hole for radios like my BTECH that utilize USB c power cables that have the charging port on back.
S
Great product and fast shipping. Keeps my radio and mic secure.
These mounts may look like a simple mount from a far, but up close you can tell a lot of thought went into them. I haven’t had it that long at this point to see the longevity of this product but the quality looks and feels top notch. They do include a couple different inserts choices for the handheld radio which is another nice touch. I’ve already used two different handheld radios on this mount and both hold well using the same clip insert. My only wish so far is that the mount angled a little more than slightly towards the driver. Overall, very satisfied and definitely recommend🤙🏼 2017 JKU
M
The handheld radio attachment part is fine, my Motorola mobile radio microphone part, does not fit as well, but will work for now, the gap on the back of the mic portion is not as wide as the actual hook on the mount, it goes on, just not secure as I would like, I think over time as I am using the mic, the hook part will thin out from use, other than that, happy with the ease of installing the mount, thank you
L
It just an awesome product! I love it!
f
Part worked perfectly!
B
Es guud
Customer Reviews
Based on 350 reviews
93%
(327)
5%
(18)
1%
(5)
0%
(0)
0%
(0)
E
Love this mount. Super secure and functional. Even better than the JL version for use with a ball. You should make a version like this for the JL
D
We spent a couple hundred miles off-road the other day and this held my GMRS mic in perfect order. We had a lot of radio traffic in the trip. Additionally it held my ham hand held in perfect order.
Highly recommend.
C
This is a great item and works perfectly.
J
I have about five jeeps, all with the typical cb radios and recently acquired a GMRS. I was trying to find a decent mount and had seen one brand that mounted magnetically. But I was worried about interference of the compass, on this particular model.
That’s when I came across JeepUniq.
I found great help trying to figure out which mount I needed for my unlisted radio. After sending in a few photos I was given the type of upper mount to select.
I also like that there’s a small, curved area within the upper mount to route a power cable. Only one thing I’d suggest is on the secondary, upper mount would be an access hole for radios like my BTECH that utilize USB c power cables that have the charging port on back.
S
Great product and fast shipping. Keeps my radio and mic secure.
These mounts may look like a simple mount from a far, but up close you can tell a lot of thought went into them. I haven’t had it that long at this point to see the longevity of this product but the quality looks and feels top notch. They do include a couple different inserts choices for the handheld radio which is another nice touch. I’ve already used two different handheld radios on this mount and both hold well using the same clip insert. My only wish so far is that the mount angled a little more than slightly towards the driver. Overall, very satisfied and definitely recommend🤙🏼 2017 JKU
M
The handheld radio attachment part is fine, my Motorola mobile radio microphone part, does not fit as well, but will work for now, the gap on the back of the mic portion is not as wide as the actual hook on the mount, it goes on, just not secure as I would like, I think over time as I am using the mic, the hook part will thin out from use, other than that, happy with the ease of installing the mount, thank you
L
It just an awesome product! I love it!
f
Part worked perfectly!
B
Es guud