BL-RAMBALL-L28-B-M1-5958
Wouxun SMO-001 HAM Mic + Yaesu FT-250 Radio Holder with 1 inch RAM Ball
$74.95
Wouxun SMO-001 HAM Mic + Yaesu FT-250 Radio Holder with 1 inch RAM Ball
Do you want to keep your Wouxun mic and your Yaesu radio securely attached and close at hand?You just found the most versatile yet custom made mount for your RAM Products Arm mounted in your vehicle.
Benefits
- Easy to install with no permanent modification to your Jeep.
- Close to reaching yet out of your way.
- Provides a vertical orientation for your handheld radio's antenna to clear the dashboard for optimal reception.
- The radio can be inserted in and taken out in an instant while using just one hand.
- Expandable system - additional rails for other radios and devices are available for purchase on our site if you decide to change your device.
- All our RAM ball mounts include a free set of Lateral Support Wings.
- A Genuine 1 inch RAM Ball is included and pre-fitted to the mount.
- All our designs are rigorously and extensively real-life tested off-road.
- Mount installs in 10 seconds or less installation.
- Safer than other mounts on the market - made of durable plastic - not tin.
- No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
- Made in the USA! All our products are proudly designed and manufactured in sunny Arizona.
Fitment
- Works with any vehicle with a 1inch RAM Products set-up.
- We also have RHD (right-hand drive) versions available. To request just send us a note.
The Mic holder for this model:
- Perfect fit for your Wouxun SMO-001 Mic.
- Supports any mic for Portable Handheld Radio using a belt-clip attachment point.
- Note that some product images might display other Mobile Mic. However the Mic holder is identical.
The Radio support rail (aka the Vertical Support Rail):
- Custom made to fit the Yaesu FT-250's belt clip.
- Rails for other radios are available for purchase on our site if you decide to change your device.
- The mount is not compatible with extended batteries that either:
- Make the radio too long such that it interferes with the mount.
- Extend the depth of the device too much such that the unit cannot be secured to the mount.
- Increase the weight of the device by more than 3oz.
- See this article for a better solution
- Since there is no standard belt-clip design we can not guarantee fit for any other devices.
- Depending on the model of your radio we include special spacers to ensure a secure and rattle-free fit.
- Note that some product images might display other Handheld Radio. However the Radio rail is similar but is specific for your device.
Other Notes
- A Genuine 1 inch RAM Ball is included and pre-fitted to the mount.
- Note that some product images might display a 20mm 67 Designs ball set-up. The mount is similar except for using a 1 inch RAM ball instead of the 67D one
Installation:
- No tools needed.
- Attach the mount's 1 inch RAM ball to your RAM arm.
Important Notes:
- Our products are for off-road use only.
- Our mounts are only designed for light accessories as stated under the Compatibility notes.
- Do NOT modify or overload the mounts with accessories not listed as supported by JeepUniq.
- Obey your local state and federal laws
- JeepUniq is not responsible for any improper or illegal use of our accessories.
- Vehicle's owner is responsible for ensuring that mounts are not in the way of the airbags.
- Note that some product images might display a 20mm 67 Designs ball set-up. The mount is similar except for using a 1 inch RAM ball instead of the 67D one
Search our shop
Customer Reviews
Based on 9 reviews
89%
(8)
11%
(1)
0%
(0)
0%
(0)
0%
(0)
E
Due to the Covid pandemic, the raw materials to make a lot of off road products have been backlogged for lot of companies lately. It took a month + to receive my order, but it was worth the wait. The only reason this product did not get 5 stars is because the 2 small side cradle holders were loose fitting and were slipping out. No worries it’s nothing a Jeep owner can’t handle with a little permanent glue. The mount is solid as a rock now and ready for adventures. I am very satisfied with the design and quality of the work. Thank you again.
S
GREAT JOB, AWESOME PRODUCT! Perfect mount and fit, stays in place. 2019 Raptor with Builtright dash mount and (2) double ball Ram Mounts. I have a Phone holder, President CB, GoPro and the BF-F8HP radio all tucked tight on the dash. A lot of different options for different radios. You need to advertise more on Overland and Offroad sites. Definitely worth it. THANKS
I
Just installed the mount and fitted the radio. This will give me access to my cup holder again. The mount gives me the ability to use out of town but to remove when in the city so I don't get any attention from the authorities.
D
I bought this to go along with a Hondo Garage Un-Holey dash mount for a BTech DMR 6x2 HT + QHM22 Speaker Mic in my 3rd gen Toyota Tacoma and it works perfect! Completely satisfied. Just wish I could post a pic of it in this review. Thanks a ton!
R
Great product for my Baofeng radio and microphone. Sits on there solidly while I’m out wheeling off-road.
D
Fits Yaesu FT60 very well. Well thought out product and very adjustable. Components fit securely. Works well with RAM Mount. Very happy to find this product and would recommend to anyone.
A
Thank
B
Got this just in time for a weekend trip, and it was rock solid, even on rough trails. I was surprised how well the radio stayed in place, and I look forward to taking it cross country !
J
Ok, it cost a little more than I wanted but since its a niche product I can understand. Best of all the quality is there! I wanted to attach my Baofeng to my YJ's RAM mount and this was perfect. Would recommend it.
Customer Reviews
Based on 9 reviews
89%
(8)
11%
(1)
0%
(0)
0%
(0)
0%
(0)
E
Due to the Covid pandemic, the raw materials to make a lot of off road products have been backlogged for lot of companies lately. It took a month + to receive my order, but it was worth the wait. The only reason this product did not get 5 stars is because the 2 small side cradle holders were loose fitting and were slipping out. No worries it’s nothing a Jeep owner can’t handle with a little permanent glue. The mount is solid as a rock now and ready for adventures. I am very satisfied with the design and quality of the work. Thank you again.
S
GREAT JOB, AWESOME PRODUCT! Perfect mount and fit, stays in place. 2019 Raptor with Builtright dash mount and (2) double ball Ram Mounts. I have a Phone holder, President CB, GoPro and the BF-F8HP radio all tucked tight on the dash. A lot of different options for different radios. You need to advertise more on Overland and Offroad sites. Definitely worth it. THANKS
I
Just installed the mount and fitted the radio. This will give me access to my cup holder again. The mount gives me the ability to use out of town but to remove when in the city so I don't get any attention from the authorities.
D
I bought this to go along with a Hondo Garage Un-Holey dash mount for a BTech DMR 6x2 HT + QHM22 Speaker Mic in my 3rd gen Toyota Tacoma and it works perfect! Completely satisfied. Just wish I could post a pic of it in this review. Thanks a ton!
R
Great product for my Baofeng radio and microphone. Sits on there solidly while I’m out wheeling off-road.
D
Fits Yaesu FT60 very well. Well thought out product and very adjustable. Components fit securely. Works well with RAM Mount. Very happy to find this product and would recommend to anyone.
A
Thank
B
Got this just in time for a weekend trip, and it was rock solid, even on rough trails. I was surprised how well the radio stayed in place, and I look forward to taking it cross country !
J
Ok, it cost a little more than I wanted but since its a niche product I can understand. Best of all the quality is there! I wanted to attach my Baofeng to my YJ's RAM mount and this was perfect. Would recommend it.