0

Your Cart is Empty

ACCESSORIES
  • All our JeepUniq Combo Mounts are modular and accept additional Vertical Rails to fit whatever new HAM or SATCOM device you might acquire.

  • Shop by Vehicle
  • The Jeep Gladiator and the Jeep JL share the same grab bars, so the JL mounts will work on both. 

    Due to the JK's interior redesign in 2010, we had to split the JK in pre and post redesign models.

    For other Jeep models and years, as well as other vehicle brands, such as Toyotas or Land Rovers, our 67 Designs or RAM Compatible ball mounts are a great solution.

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • VR22

    Add-on Vertical Rails for JK, 67 Designs, or RAM Combo Mounts - 22mm

     

    Vertical Support Rail for Handheld Devices

    Expand your existing JeepUniq Combo Mount with an additional rail to support additional devices.

    *** New Version includes Battery Eliminator cable cut-out (see pictures) to allow cable routing. ***

     

    Benefits

  • Cost Effective by leveraging any of our Combo mounts.
  • Easy 10 seconds Install or less installation
  • Safer than other mounts on the market since it's made of strong plastic. No sharp metal edges that can scratch a pet (or a passenger) bouncing around on that awful back washboard on your way to Monument Valley.
  • Made in USA! All our products are proudly designed and manufactured in the sunny Arizona.
  • Fitment 

    • Works with any Combo JeepUniq mount. Combo mounts are those that came with a Vertical Rail at the time of purchase.
    • Does NOT work with single device mounts.
    • Please measure your device against the dimensions listed below:Vertical Rail Dimensions
    • W is the Width of the Belt Clip supported by this rail. Choose the width that fits your device.
    • Use the C and B dimensions to ensure that the Belt Clip of your device will be able to grip within the Red Ribbed are in the picture above (the Rail Insert area).

    What's Included

    • One (1) Vertical Rail. This is the latest version that includes a special cut-out to route the Battery Eliminator cable (if you use one).
    • Three (3) Rail Inserts (same as those included with your original mount). Note that regardless the color you choose for your rail, the rails will be black.

    Other Notes

    • The mount is not compatible with extended batteries that either:
      • Make the radio too long such that it interferes with the mount
      • Extend the depth of the device too much such that the unit cannot be secured to the mount
      • Increase the weight of the device by more than 3oz.

    Installation Notes:

    • To avoid damage to your existing JeepUniq mount and/or your vehicle, we strongly recommend that you remove your mount off your vehicle. Use patience and care not to break anything.
    • Make sure not to break the mount when pulling your existing Vertical Rail. On some mounts the Rail will seem to be stuck to the mount - if so, use a blunt screwdriver and a rubber mallet to tap it out.

    Tools Needed to install:

    • No tools needed.

    Our Lawyers Say:

    • Our products are for off-road use only.
    • Obey your local state and federal laws
    • JeepUniq is not responsible for any improper or illegal use of our accessories.

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)